7.5KW - 110KW Y81T - 200 Hydraulic Baling Pres With 63 - 500 Tons
Nominal Force
Specifications
Hydraulic metal baler
Hydraulic drive ,manual valve operation or PLC control
Bale-discharging :turn-out ,push-out, forward-out
Waste metal baler machine
Metal press baler machine
Technical Parameters
Power System | Rated Speed | Rated Power | Power Spec. | Lid cyl. Force | Side Pressure cyl. Force | Main Pressure cyl. Force |
Motor , 2 sets | 1470 rpm | 18.5 kw/set | 3ph,50/60 HZ | 63 Ton | 2*100 Ton | 200 Ton |
|
|
|
|
|
|
|
Small Door Cyl. Force | Hydraulic System Pressure | Idle Cycle Time | Hydraulic System | Rated Displacement | Max. Operating Pressure | Operating System |
50 Ton | 25mpa | APPROX. 100 sec | Pump, 2 sets | 80 mr/r (/set) | 31.5 Mpa | Manual Valve Operation; PLC Control |
|
|
|
|
|
|
|
Standard Operation | Optional Configuration |
A3 Steel Liners , Surface Heat Treatment | Cutting Blades and Teeth(2 sides) |
Loding Hooper; Cooler / Heater | Diesel / Diesel Generator for Power |
Company Profile
Jiangsu Dalongkai Technology Co., Ltd is the professional
manufacturer who is specialized in producing the balers, metal
shears, metal scrap briquette machines, loose material baler and
other hydraulic machinery. We provide both standard and customized
design in large range of different machines. They are widely
applied in industries of metal smelting, textile, fiber,
paper-making, waste recycle, automobile, metal processing and so
on. Our products are not only renowned in more than 30 provinces
and cities in domestic market, but also have being sold popularly
in more than dozens of countries and areas all over the world like
Eastern Europe, West Europe, Middle East, Africa, Southeast Asia,
Oceania, North America and South America etc.
Introduction
Y81 series hydraulic metal packaging can be all kinds of metal
scrap (scrap, shavings, scrap steel, aluminum, copper, stainless
steel scrap, scrap cars, etc.) squeezed into a rectangular,
octagonal shape, the shape of a cylinder and other qualified
furnace, can reduce the transportation and smelting costs, but also
improve the rate of investment furnace. This series baler is mainly
used in steel mills, recycling industries, as well as nonferrous
metal, ferrous metal smelting industry.Such baler is mainly used in
steel plants, reclamation &processing industry and nonferrous
&ferrous metal refining industry. Such machineries adopt
hydraulic drives, with manual or PLC automatic control operation as
options. The discharging types fall into turning over, push out,
forward out and manual lifting.It is unnecessary to fix foot screws
and a diesel engine can be used in case of power supply
unavailability.The extrusion force ranges from 63t to 400t,
totaling10 grades for customers’ selection,and productivity being
from 4t/shift to 40/shift.The size of the compression chamber and
the form and size of the bale can be designed and customized
according to the requirements of the customers.
