Motor Power Q91 - 800 Scrap Metal Shear / Square Sheet Shear
Machine
Introduction
Gantry Platferrous metal, Q91 series square sheet shear machine is
suitable for steel mills, metal recycling and processing industry
and non-ferrous metal, ferrous smelting industry, etc.
Q91 series square sheet shear machine adopts hydraulic
transmission, compared with the mechanical drive type shears, has
small volume, light weight, small inertia, low noise, stable
movement, convenient operation, flexible, large shear section,
scissors, not soft not hard mouth, when shear is not short of
blasting, long service life, no gap again thin all good shear, convenient
adjustment and operation safety.
The steel sheet slitter is mainly applied to the cutting of metal
plate materials such as steel plate, copper plate and nickel plate.
The shear force ranges from 100 tons to 250 tons. The main size of
cut material is (12~20mm)*250mm. the shearing times is 8~12 per
minute. This series require the simple infrastructure construction.
Advantages
1. This equipment adopts hydraulic transmission, compared with the
mechanical drive type shear machine, has small volume, light
weight, small inertia, low noise, stable movement, convenient
operation, flexible, large shear plane, scissors, convenient
adjustment, the use of safe operation, easy to achieve overload
protection;
2. This equipment is designed for fast, without any increase in
power of the motor and pump displacement condition, in (about 250
tons) under shear speed fast, large shear material automatically
converting speed. Recover the original shear force, so as to
improve the work efficiency nearly doubled,
3. This equipment has the function of manual and automatic,
convenient operation, simple control, scissors mouth work in any
position in the process of starting cut and stop, and can according
to the size of the cut materials, arbitrary control cut the size of
the mouth, in order to obtain the highest working efficiency;
Technical Specificarions | Shear cylinder
| model | YG200/140-150 | Quantity | 1 | Nominal Force | 800KN
| Stroke
| 150mm | press cylinder | model | YG80/50-138 | Quantity | 1 | Nominal Force | 125KN | Stroke
| 138mm | motor | model | Y160L-4 | Power | 15kw | Nominal speed
| 1470 R/MiN | Quantity | 1 | oil pump | Model | 63YCY14-1B | Nominal Pressure | 31.5 mpa | Nominal output
| 250 ml / r | Quantity | 1 |
|
