Introduction
This is a Y81 series side discharge 250 ton single master cylinder
scrap metal baler. This baler is mainly divided into a main engine
and a hydraulic station. The main engine mainly includes a single
master cylinder, two side cylinders, two door cover cylinders, door
cover and pressing box, etc. The hydraulic station mainly includes
fuel tank, motor, cooler and integrated valve block etc. Our balers
can be customized and produced, and the accessories are all
well-known brands at home and abroad, with guaranteed quality and
long service life. This baler is widely used in scrap metal
recycling plants, steel mills and ferrous metal smelting
industries.
Technical Parameters
| NO. | Parameter name and content |
| 1 | hydraulic system working pressure | ≤26MPa |
| 2 | Press box size | 2500x2000x1000mm |
| 3 | Block section size | (300x300)mm |
| 4 | Bale density (steel) | ≤2000/m³ |
| 5 | Single no-load cycle time | About 90 seconds |
| 6 | Operation method | Hand-in-one, remote control operation |
The parameters in the above table are for reference only.
Features of the push-out baler machine
1. Hydraulic drive is adopted, and manual or PLC automatic control
operation can be selected.
2. Side push out material.
3. No anchor screws are required for installation. In places
without power supply, diesel engine can be used as power.
4. The size of the press box and the size of the bale can be
customized according to customer needs.
Application
The baler Can Compressing Machinery Scrap Iron Aluminum Metal Baler
is used to compress scrap metal(steel, copper, aluminum,stainless
steel, etc)into metal block or metal bale. The purpose is to save
the transportation cost or reduce the raw material loss when
smelting.
Shipping
Company Profile
Dalongkai Technology Co., Ltd. is a manufacturer of metal recycling
machinery, the main products include: metal balers, gantry shears,
horizontal shears, crocodile shears, briquetting machines and scrap
crushers. We can also provide rebar pelletizers, shear balers,
container pushers, etc. With so many types of recycling machinery,
there are many options for you. Our scrap metal recycling machines
handle your metal scrap perfectly, increasing your profits and
reducing your costs. According to customer needs, our machines can
also be installed with a remote monitoring system, which can
identify machine failure problems and assist customers in solving
them.
FAQ
Q1 : Can I add my logo on the machines?
A : Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.
Q2 : How can i get the after-service?
A : We will send you the spare parts by free if the problems caused by
us.
If it is the men-made problems, we also send the spare parts, but
you should pay.
Q3 : Do you have inspection procedures for machines?
A : 100% self-inspection before packing
Q4 : Can I have a visit to your factory before the order?
A : Sure, welcome to visit our factory.
Here is our factory address:No.29, Panlongshan Road, Jiangyin City,
Jiangsu Province, China.
Q5 : Can we order one set machine?
A : Yes, you can.
